How to Connect to the ZenCharger Webinterface

Connecting to the Charging Point

  • Step 1: Turn Off the Fuse
    1. Locate the fuse of the charging point.
    2. Turn off the fuse and wait for 10 seconds.
  • Step 2: Turn On the Fuse Again
    1. Turn the fuse back on.
    2. The charging point will now restart.
  • Step 3: Connect to the Wifi Hotspot
    1. Wait until the charging point is fully started (green LED).
    2. The wifi hotspot of the charging point is now available.
    3. Look for the wifi name of the charging point (ZenCharger-xxxxxxxxx) on your device and connect to it by entering the WlanApPassword found on the sticker in the manual.
    4. You can also scan the QR code on the manual sticker.

Accessing the Web Interface

  • Step 4: Log In via the Web Interface
    1. Open a web browser on your device.
    2. Go to the web interface of the charging point by browsing to 172.16.0.1.
  • Step 5: Configuration Login
    1. Enter the ConfigPagePassword found on the sticker in the manual.
    2. You now have access to the web interface of the charging point!
Last updated byadmin